Integrations
Works with the loggers and instruments your lab already uses.
Energy Mark reads exports and live feeds from your existing equipment. Map each channel once and every reading is checked before it is used.
| Channel | Reading | Unit | Mapped to |
|---|---|---|---|
| CH1 | Active power | W | Power |
| CH2 | Voltage | V | Voltage |
| CH3 | Current | A | Current |
| CH4 | Energy | Wh | Cumulative energy |
Instruments
Instruments labs commonly use.
If your instrument can export its readings or share them over a standard protocol, Energy Mark can read them.
Power analysers and meters
- Yokogawa WT series
- Hioki power analysers
- ZES ZIMMER LMG
- Newtons4th PPA
- Chroma digital power meters
- Tektronix PA series
Data acquisition and loggers
- Yokogawa SMARTDAC+
- Keysight DAQ970A
- Fluke Hydra series
- Graphtec midi LOGGER
- HBK QuantumX
- Dewesoft SIRIUS
- NI CompactDAQ
- Keithley DAQ6510
- Ahlborn ALMEMO
Temperature and humidity
- Thermocouples, type T and K
- Pt100 RTDs
- Vaisala HMP probes
- Rotronic HygroClip
- Testo data loggers
Chambers and test rigs
- Climatic chambers from Weiss Technik, ESPEC and Binder
- Psychrometric and calorimeter rooms
- Lab rigs on Siemens or Rockwell PLCs
Brand names belong to their owners. Your exact models and export formats are confirmed during the POC.
Connections
Four ways data gets in.
File exports
CSV, TXT and Excel files, and common vendor export formats. Upload them, or point Energy Mark at a shared folder.
Live feeds
OPC UA, Modbus TCP and MQTT, where your IT team approves a direct connection.
Historians and databases
AVEVA PI and SQL databases that already store your lab readings.
Lab systems
Product and unit details from your LIMS or test management system.
Set up
Set up once for each logger.
- 01
Point to the source
A shared folder, an upload or a live feed from your logger.
- 02
Map the channels once
Tell Energy Mark which channel is power, voltage, compartment temperature, ambient and humidity.
- 03
Set units and intervals
Watts or kilowatts, degrees, sampling every few seconds. Saved as a logger profile.
- 04
Check with a completed test
Run one finished test through it and compare the readings with your own records.
Proof of concept
See it predict your own tests.
A POC on your completed tests shows how early the final result becomes clear for your products.